Prozone Engineers

Features

Core • 16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline • Extended instruction set Memories • Program memory: 8 Kbyte Flash memory; data retention 20 years at 55 °C after 100 cycles • RAM: 1 Kbyte • Data memory: 128 bytes true data EEPROM; endurance up to 100 k write/erase cycles Clock, reset and supply management • 2.95 V to 5.5 V operating voltage • Flexible clock control, 4 master clock sources – Low-power crystal resonator oscillator – External clock input – Internal, user-trimmable 16 MHz RC – Internal low-power 128 kHz RC • Clock security system with clock monitor • Power management – Low-power modes (wait, active-halt, halt) – Switch-off peripheral clocks individually – Permanently active, low-consumption power-on and power-down reset Interrupt management • Nested interrupt controller with 32 interrupts • Up to 27 external interrupts on 6 vectors Timers • Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization • 16-bit general purpose timer, with 3 CAPCOM channels (IC, OC or PWM) • 8-bit basic timer with 8-bit prescaler • Auto wakeup timer • Window and independent watchdog timers Communications interfaces • UART with clock output for synchronous operation, SmartCard, IrDA, LIN master mode • SPI interface up to 8 Mbit/s • I 2C interface up to 400 Kbit/s Analog to digital converter (ADC) • 10-bit ADC, ± 1 LSB ADC with up to 5 multiplexed channels, scan mode and analog watchdog I/Os • Up to 28 I/Os on a 32-pin package including 21 high-sink outputs • Highly robust I/O d

Additional Information:

• Production Capacity: 100000
• Delivery Time: 1-2 Weeks Delivery Time

Manufacturer: STMicroelectronics Product Category: 8-bit Microcontrollers - MCU RoHS: Details Series: STM8S001J3 Mounting Style: SMD/SMT Package/Case: SOIC-8 Core: STM8 Program Memory Size: 8 kB Data Bus Width: 8 bit ADC Resolution: 10 bit Maximum Clock Frequency: 16 MHz Number of I/Os: 5 I/O Data RAM Size: 1 kB Supply Voltage - Min: 2.95 V Supply Voltage - Max: 5.5 V Minimum Operating Temperature: - 40 C Maximum Operating Temperature: + 125 C Packaging: Reel Packaging: Cut Tape Packaging: MouseReel Brand: STMicroelectronics Product Type: 8-bit Microcontrollers - MCU 2500 Subcategory: Microcontrollers - MCU Unit Weight: 80 mg

Additional Information:

• Production Capacity: 100000
• Delivery Time: 1-2 weeks
• Packaging Details: SOIC-8 SMD

Manufacturer: STMicroelectronics Product Category: 8-bit Microcontrollers - MCU RoHS: Details Series: STM8S005C6 Mounting Style: SMD/SMT Package/Case: LQFP-48 Core: STM8 Program Memory Size: 32 kB Data Bus Width: 8 bit ADC Resolution: 10 bit Maximum Clock Frequency: 16 MHz Number of I/Os: 38 I/O Data RAM Size: 2 kB Supply Voltage - Min: 2.95 V Supply Voltage - Max: 5.5 V Minimum Operating Temperature: - 40 C Maximum Operating Temperature: + 85 C Packaging: Tray Brand: STMicroelectronics Data ROM Size: 128 B Data ROM Type: EEPROM Interface Type: I2C, SPI, UART Moisture Sensitive: Yes Number of ADC Channels: 10 Channel Number of Timers/Counters: 3 Timer Processor Series: STM8S005 Product Type: 8-bit Microcontrollers - MCU Program Memory Type: Flash 1500 Subcategory: Microcontrollers - MCU Unit Weight: 181.700 mg

Additional Information:

• Production Capacity: 100000
• Delivery Time: 1-2 Weeks

STM8S103K3

FeaturesCore• 16 MHz advanced STM8 core with Harvardarchitecture and 3-stage pipeline• Extended instruction setMemories• Program memory: 8 Kbyte Flash; dataretention 20 years at 55 °C after 10 kcycle• Data memory: 640 byte true data EEPROM;endurance 300 kcycle• RAM: 1 KbyteClock, reset and supply management• 2.95 to 5.5 V operating voltage• Flexible clock control, 4 master clock sources– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low-power 128 kHz RC• Clock security system with clock monitor• Power management:– Low-power modes (wait, active-halt, halt)– Switch-off peripheral clocks individually• Permanently active, low-consumption poweronand power-down resetInterrupt management• Nested interrupt controller with 32 interrupts• Up to 27 external interrupts on 6 vectorsTimers• Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, dead-timeinsertion and flexible synchronization• 16-bit general purpose timer, with 3 CAPCOMchannels (IC, OC or PWM)• 8-bit basic timer with 8-bit prescaler• Auto wake-up timer• Window watchdog and independent watchdogtimersCommunication interfaces• UART with clock output for synchronousoperation, SmartCard, IrDA, LIN master mode• SPI interface up to 8 Mbit/s• I2C interface up to 400 kbit/sAnalog to digital converter (ADC)• 10-bit, ±1 LSB ADC with up to 5 multiplexedchannels, scan mode and analog watchdogI/Os• Up to 28 I/Os on a 32-pin package including21 high sink outputs• Highly robust I/O design, immune againstcurrent injectionUnique ID• 96-bit unique key for each device

Additional Information:

• Production Capacity: 150000
• Delivery Time: 1-2 Weeks
• Packaging Details: SMD LQFP 32 7x7x1.4 mm,UFQFPN 32 5x5x0.55 mm

Manufacturer: STMicroelectronics Product Category: 8-bit Microcontrollers - MCU RoHS: Details Series: STM8S003F3 Mounting Style: SMD/SMT Package/Case: TSSOP-20 Core: STM8 Program Memory Size: 8 kB Data Bus Width: 8 bit ADC Resolution: 10 bit Maximum Clock Frequency: 16 MHz Number of I/Os: 16 I/O Data RAM Size: 1 kB Supply Voltage - Min: 2.95 V Supply Voltage - Max: 5.5 V Minimum Operating Temperature: - 40 C Maximum Operating Temperature: + 85 C Packaging: Tube Brand: STMicroelectronics Data RAM Type: RAM Data ROM Size: 128 B Data ROM Type: EEPROM Interface Type: I2C, SPI, UART Number of ADC Channels: 5 Channel Number of Timers/Counters: 3 Timer Processor Series: STM8S Product Type: 8-bit Microcontrollers - MCU Program Memory Type: Flash 1480 Subcategory: Microcontrollers - MCU Unit Weight: 200 mg

Additional Information:

• Production Capacity: 10000
• Delivery Time: 1-2 Weeks
• Packaging Details: TSSOP-20 SMD

STM8S103F2

16 MHz STM8S 8-bit MCU, up to 8 Kbytes Flash, data EEPROM,10-bit ADC, 3 timers, UART, SPI, I²C

FeaturesCore• 16 MHz advanced STM8 core with Harvardarchitecture and 3-stage pipeline• Extended instruction setMemories• Program memory: 8 Kbyte Flash; dataretention 20 years at 55 °C after 10 kcycle• Data memory: 640 byte true data EEPROM;endurance 300 kcycle• RAM: 1 KbyteClock, reset and supply management• 2.95 to 5.5 V operating voltage• Flexible clock control, 4 master clock sources– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low-power 128 kHz RC• Clock security system with clock monitor• Power management:– Low-power modes (wait, active-halt, halt)– Switch-off peripheral clocks individually• Permanently active, low-consumption poweron and power-down resetInterrupt management• Nested interrupt controller with 32 interrupts• Up to 27 external interrupts on 6 vectorsTimers• Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, dead-timeinsertion and flexible synchronization• 16-bit general purpose timer, with 3 CAPCOMchannels (IC, OC or PWM)• 8-bit basic timer with 8-bit prescaler• Auto wake-up timer• Window watchdog and independent watchdogtimersCommunication interfaces• UART with clock output for synchronousoperation, SmartCard, IrDA, LIN master mode• SPI interface up to 8 Mbit/s• I2C interface up to 400 kbit/sAnalog to digital converter (ADC)• 10-bit, ±1 LSB ADC with up to 5 multiplexedchannels, scan mode and analog watchdogI/Os• Up to 28 I/Os on a 32-pin package including21 high sink outputs• Highly robust I/O design, immune againstcurrent injectionUnique ID• 96-bit unique key for each device

Additional Information:

• Production Capacity: 100000
• Delivery Time: 1-2 weeks

FeaturesCore 16 MHz advanced STM8 core with Harvardarchitecture and 3-stage pipeline Extended instruction setMemories Program memory: up to 32 Kbyte Flash; dataretention 20 years at 55 °C after 10 kcycle Data memory: up to 1 Kbyte true dataEEPROM; endurance 300 kcycle RAM: up to 2 KbyteClock, reset and supply management 2.95 to 5.5 V operating voltage Flexible clock control, 4 master clock sources– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low-power 128 kHz RC Clock security system with clock monitor Power management:– Low-power modes (wait, active-halt, halt)– Switch-off peripheral clocks individually Permanently active, low-consumption poweron and power-down resetInterrupt management Nested interrupt controller with 32 interrupts Up to 37 external interrupts on 6 vectorsTimers Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, dead-timeinsertion and flexible synchronization 2x16-bit general purpose timer, with 2+3CAPCOM channels (IC, OC or PWM) 8-bit basic timer with 8-bit prescaler Auto wake-up timer Window watchdog and independent watchdogtimersCommunication interfaces UART with clock output for synchronousoperation, SmartCard, IrDA, LIN master mode SPI interface up to 8 Mbit/s I2C interface up to 400 kbit/sAnalog to digital converter (ADC) 10-bit, ±1 LSB ADC with up to 10 multiplexedchannels, scan mode and analog watchdogI/Os Up to 38 I/Os on a 48-pin package including16 high sink outputs Highly robust I/O design, immune againstcurrent injectionUnique ID 96-bit unique key for each device

Additional Information:

• Production Capacity: 100000
• Delivery Time: 1-2 Weeks

FeaturesCore 16 MHz advanced STM8 core with Harvardarchitecture and 3-stage pipeline Extended instruction setMemories Program memory: up to 32 Kbyte Flash; dataretention 20 years at 55 °C after 10 kcycle Data memory: up to 1 Kbyte true dataEEPROM; endurance 300 kcycle RAM: up to 2 KbyteClock, reset and supply management 2.95 to 5.5 V operating voltage Flexible clock control, 4 master clock sources– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low-power 128 kHz RC Clock security system with clock monitor Power management:– Low-power modes (wait, active-halt, halt)– Switch-off peripheral clocks individually Permanently active, low-consumption poweron and power-down resetInterrupt management Nested interrupt controller with 32 interrupts Up to 37 external interrupts on 6 vectorsTimers Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, dead-timeinsertion and flexible synchronization 2x16-bit general purpose timer, with 2+3CAPCOM channels (IC, OC or PWM) 8-bit basic timer with 8-bit prescaler Auto wake-up timer Window watchdog and independent watchdogtimersCommunication interfaces UART with clock output for synchronousoperation, SmartCard, IrDA, LIN master mode SPI interface up to 8 Mbit/s I2C interface up to 400 kbit/sAnalog to digital converter (ADC) 10-bit, ±1 LSB ADC with up to 10 multiplexedchannels, scan mode and analog watchdogI/Os Up to 38 I/Os on a 48-pin package including16 high sink outputs Highly robust I/O design, immune againstcurrent injectionUnique ID 96-bit unique key for each device

Additional Information:

• Production Capacity: 100000
• Delivery Time: 10-14 working days
• Packaging Details: SMD LQFB-48, 7x7x1.4 mm

FeaturesCore 16 MHz advanced STM8 core with Harvardarchitecture and 3-stage pipeline Extended instruction setMemories Program memory: up to 32 Kbyte Flash; dataretention 20 years at 55 °C after 10 kcycle Data memory: up to 1 Kbyte true dataEEPROM; endurance 300 kcycle RAM: up to 2 KbyteClock, reset and supply management 2.95 to 5.5 V operating voltage Flexible clock control, 4 master clock sources– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low-power 128 kHz RC Clock security system with clock monitor Power management:– Low-power modes (wait, active-halt, halt)– Switch-off peripheral clocks individually Permanently active, low-consumption poweron and power-down resetInterrupt management Nested interrupt controller with 32 interrupts Up to 37 external interrupts on 6 vectorsTimers Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, dead-timeinsertion and flexible synchronization 2x16-bit general purpose timer, with 2+3CAPCOM channels (IC, OC or PWM) 8-bit basic timer with 8-bit prescaler Auto wake-up timer Window watchdog and independent watchdogtimersCommunication interfaces UART with clock output for synchronousoperation, SmartCard, IrDA, LIN master mode SPI interface up to 8 Mbit/s I2C interface up to 400 kbit/sAnalog to digital converter (ADC) 10-bit, ±1 LSB ADC with up to 10 multiplexedchannels, scan mode and analog watchdogI/Os Up to 38 I/Os on a 48-pin package including16 high sink outputs Highly robust I/O design, immune againstcurrent injectionUnique ID 96-bit unique key for each device

Additional Information:

• Production Capacity: 100000
• Delivery Time: 10-14 working days

FeaturesCore 16 MHz advanced STM8 core with Harvardarchitecture and 3-stage pipeline Extended instruction setMemories Program memory: up to 32 Kbyte Flash; dataretention 20 years at 55 °C after 10 kcycle Data memory: up to 1 Kbyte true dataEEPROM; endurance 300 kcycle RAM: up to 2 KbyteClock, reset and supply management 2.95 to 5.5 V operating voltage Flexible clock control, 4 master clock sources– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low-power 128 kHz RC Clock security system with clock monitor Power management:– Low-power modes (wait, active-halt, halt)– Switch-off peripheral clocks individually Permanently active, low-consumption poweron and power-down resetInterrupt management Nested interrupt controller with 32 interrupts Up to 37 external interrupts on 6 vectorsTimers Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, dead-timeinsertion and flexible synchronization 2x16-bit general purpose timer, with 2+3CAPCOM channels (IC, OC or PWM) 8-bit basic timer with 8-bit prescaler Auto wake-up timer Window watchdog and independent watchdogtimersCommunication interfaces UART with clock output for synchronousoperation, SmartCard, IrDA, LIN master mode SPI interface up to 8 Mbit/s I2C interface up to 400 kbit/sAnalog to digital converter (ADC) 10-bit, ±1 LSB ADC with up to 10 multiplexedchannels, scan mode and analog watchdogI/Os Up to 38 I/Os on a 48-pin package including16 high sink outputs Highly robust I/O design, immune againstcurrent injectionUnique ID 96-bit unique key for each device

Additional Information:

• Production Capacity: 25000
• Delivery Time: 1-2 Weeks
• Packaging Details: 7x7x1.4 mm,UFQFPN 32 5x5x0.55 mm SMD

FeaturesCore 16 MHz advanced STM8 core with Harvardarchitecture and 3-stage pipeline Extended instruction setMemories Program memory: up to 32 Kbyte Flash; dataretention 20 years at 55 °C after 10 kcycle Data memory: up to 1 Kbyte true dataEEPROM; endurance 300 kcycle RAM: up to 2 KbyteClock, reset and supply management 2.95 to 5.5 V operating voltage Flexible clock control, 4 master clock sources– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low-power 128 kHz RC Clock security system with clock monitor Power management:– Low-power modes (wait, active-halt, halt)– Switch-off peripheral clocks individually Permanently active, low-consumption poweron and power-down resetInterrupt management Nested interrupt controller with 32 interrupts Up to 37 external interrupts on 6 vectorsTimers Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, dead-timeinsertion and flexible synchronization 2x16-bit general purpose timer, with 2+3CAPCOM channels (IC, OC or PWM) 8-bit basic timer with 8-bit prescaler Auto wake-up timer Window watchdog and independent watchdogtimersCommunication interfaces UART with clock output for synchronousoperation, SmartCard, IrDA, LIN master mode SPI interface up to 8 Mbit/s I2C interface up to 400 kbit/sAnalog to digital converter (ADC) 10-bit, ±1 LSB ADC with up to 10 multiplexedchannels, scan mode and analog watchdogI/Os Up to 38 I/Os on a 48-pin package including16 high sink outputs Highly robust I/O design, immune againstcurrent injectionUnique ID 96-bit unique key for each device

Additional Information:

• Production Capacity: 25000
• Delivery Time: 10-14 Working Days

FeaturesCore 16 MHz advanced STM8 core with Harvardarchitecture and 3-stage pipeline Extended instruction setMemories Program memory: up to 32 Kbyte Flash; dataretention 20 years at 55 °C after 10 kcycle Data memory: up to 1 Kbyte true dataEEPROM; endurance 300 kcycle RAM: up to 2 KbyteClock, reset and supply management 2.95 to 5.5 V operating voltage Flexible clock control, 4 master clock sources– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low-power 128 kHz RC Clock security system with clock monitor Power management:– Low-power modes (wait, active-halt, halt)– Switch-off peripheral clocks individually Permanently active, low-consumption poweron and power-down resetInterrupt management Nested interrupt controller with 32 interrupts Up to 37 external interrupts on 6 vectorsTimers Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, dead-timeinsertion and flexible synchronization 2x16-bit general purpose timer, with 2+3CAPCOM channels (IC, OC or PWM) 8-bit basic timer with 8-bit prescaler Auto wake-up timer Window watchdog and independent watchdogtimersCommunication interfaces UART with clock output for synchronousoperation, SmartCard, IrDA, LIN master mode SPI interface up to 8 Mbit/s I2C interface up to 400 kbit/sAnalog to digital converter (ADC) 10-bit, ±1 LSB ADC with up to 10 multiplexedchannels, scan mode and analog watchdogI/Os Up to 38 I/Os on a 48-pin package including16 high sink outputs Highly robust I/O design, immune againstcurrent injectionUnique ID 96-bit unique key for each device

Additional Information:

• Production Capacity: 25000
• Delivery Time: 10-14 Working Days

FeaturesCore 16 MHz advanced STM8 core with Harvardarchitecture and 3-stage pipeline Extended instruction setMemories Program memory: up to 32 Kbyte Flash; dataretention 20 years at 55 °C after 10 kcycle Data memory: up to 1 Kbyte true dataEEPROM; endurance 300 kcycle RAM: up to 2 KbyteClock, reset and supply management 2.95 to 5.5 V operating voltage Flexible clock control, 4 master clock sources– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low-power 128 kHz RC Clock security system with clock monitor Power management:– Low-power modes (wait, active-halt, halt)– Switch-off peripheral clocks individually Permanently active, low-consumption poweron and power-down resetInterrupt management Nested interrupt controller with 32 interrupts Up to 37 external interrupts on 6 vectorsTimers Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, dead-timeinsertion and flexible synchronization 2x16-bit general purpose timer, with 2+3CAPCOM channels (IC, OC or PWM) 8-bit basic timer with 8-bit prescaler Auto wake-up timer Window watchdog and independent watchdogtimersCommunication interfaces UART with clock output for synchronousoperation, SmartCard, IrDA, LIN master mode SPI interface up to 8 Mbit/s I2C interface up to 400 kbit/sAnalog to digital converter (ADC) 10-bit, ±1 LSB ADC with up to 10 multiplexedchannels, scan mode and analog watchdogI/Os Up to 38 I/Os on a 48-pin package including16 high sink outputs Highly robust I/O design, immune againstcurrent injectionUnique ID 96-bit unique key for each device

Additional Information:

• Production Capacity: 25000
• Delivery Time: 10-14 working days

Features Core– Max fCPU: up to 24 MHz, 0 wait states @fCPU 16 MHz– Advanced STM8 core with Harvardarchitecture and 3-stage pipeline– Extended instruction set– Max 20 MIPS @ 24 MHz Memories– Program: up to 128 Kbytes Flash; dataretention 20 years at 55 °C after 10 kcycles– Data: up to 2 Kbytes true data EEPROM;endurance 300 kcycles– RAM: up to 6 Kbytes Clock, reset and supply management– 2.95 to 5.5 V operating voltage– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low power 128 kHz RC– Clock security system with clock monitor– Wait, active-halt, & halt low power modes– Peripheral clocks switched off individually– Permanently active, low consumptionpower-on and power-down reset Interrupt management– Nested interrupt controller with 32interrupts– Up to 37 external interrupts on 6 vectors Timers– 2x 16-bit general purpose timers, with 2+3CAPCOM channels (IC, OC or PWM)– Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, deadtime insertion and flexible synchronization– 8-bit basic timer with 8-bit prescaler– Auto wakeup timer– Window watchdog, independent watchdog Communications interfaces– High speed 1 Mbit/s active beCAN 2.0B– UART with clock output for synchronousoperation - LIN master mode– UART with LIN 2.1 compliant, master/slavemodes and automatic resynchronization– SPI interface up to 10 Mbit/s– I2C interface up to 400 Kbit/s 10-bit ADC with up to 16 channels I/Os– Up to 68 I/Os on an 80-pin packageincluding 18 high sink outputs– Highly robust I/O design, immune againstcurrent injection– Development support– Single wire interface module (SWIM) anddebug module (DM) 96-bit unique ID key for each device

Additional Information:

• Production Capacity: 25000
• Delivery Time: 1-2 weeks

Features Core– Max fCPU: up to 24 MHz, 0 wait states @fCPU 16 MHz– Advanced STM8 core with Harvardarchitecture and 3-stage pipeline– Extended instruction set– Max 20 MIPS @ 24 MHz Memories– Program: up to 128 Kbytes Flash; dataretention 20 years at 55 °C after 10 kcycles– Data: up to 2 Kbytes true data EEPROM;endurance 300 kcycles– RAM: up to 6 Kbytes Clock, reset and supply management– 2.95 to 5.5 V operating voltage– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low power 128 kHz RC– Clock security system with clock monitor– Wait, active-halt, & halt low power modes– Peripheral clocks switched off individually– Permanently active, low consumptionpower-on and power-down reset Interrupt management– Nested interrupt controller with 32interrupts– Up to 37 external interrupts on 6 vectors Timers– 2x 16-bit general purpose timers, with 2+3CAPCOM channels (IC, OC or PWM)– Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, deadtime insertion and flexible synchronization– 8-bit basic timer with 8-bit prescaler– Auto wakeup timer– Window watchdog, independent watchdog Communications interfaces– High speed 1 Mbit/s active beCAN 2.0B– UART with clock output for synchronousoperation - LIN master mode– UART with LIN 2.1 compliant, master/slavemodes and automatic resynchronization– SPI interface up to 10 Mbit/s– I2C interface up to 400 Kbit/s 10-bit ADC with up to 16 channels I/Os– Up to 68 I/Os on an 80-pin packageincluding 18 high sink outputs– Highly robust I/O design, immune againstcurrent injection– Development support– Single wire interface module (SWIM) anddebug module (DM) 96-bit unique ID key for each device

Additional Information:

• Delivery Time: 1-2 Weeks

Features Core– Max fCPU: up to 24 MHz, 0 wait states @fCPU 16 MHz– Advanced STM8 core with Harvardarchitecture and 3-stage pipeline– Extended instruction set– Max 20 MIPS @ 24 MHz Memories– Program: up to 128 Kbytes Flash; dataretention 20 years at 55 °C after 10 kcycles– Data: up to 2 Kbytes true data EEPROM;endurance 300 kcycles– RAM: up to 6 Kbytes Clock, reset and supply management– 2.95 to 5.5 V operating voltage– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low power 128 kHz RC– Clock security system with clock monitor– Wait, active-halt, & halt low power modes– Peripheral clocks switched off individually– Permanently active, low consumptionpower-on and power-down reset Interrupt management– Nested interrupt controller with 32interrupts– Up to 37 external interrupts on 6 vectors Timers– 2x 16-bit general purpose timers, with 2+3CAPCOM channels (IC, OC or PWM)– Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, deadtime insertion and flexible synchronization– 8-bit basic timer with 8-bit prescaler– Auto wakeup timer– Window watchdog, independent watchdog Communications interfaces– High speed 1 Mbit/s active beCAN 2.0B– UART with clock output for synchronousoperation - LIN master mode– UART with LIN 2.1 compliant, master/slavemodes and automatic resynchronization– SPI interface up to 10 Mbit/s– I2C interface up to 400 Kbit/s 10-bit ADC with up to 16 channels I/Os– Up to 68 I/Os on an 80-pin packageincluding 18 high sink outputs– Highly robust I/O design, immune againstcurrent injection– Development support– Single wire interface module (SWIM) anddebug module (DM) 96-bit unique ID key for each device

Additional Information:

• Delivery Time: 1-2 Weeks

Features  High performance, low power AVR® 8-bit microcontroller  Advanced RISC architecture  131 powerful instructions – most single clock cycle execution  32  8 general purpose working registers  Fully static operation  Up to 16MIPS throughput at 16MHz   On-chip 2-cycle multiplier  High endurance non-volatile memory segments  32K bytes of in-system self-programmable flash program memory  1Kbytes EEPROM  2Kbytes internal SRAM  Write/erase cycles: 10,000 flash/100,000 EEPROM  Optional boot code section with independent lock bits  In-system programming by on-chip boot program  True read-while-write operation   Programming lock for software security  Peripheral features  Two 8-bit Timer/Counters with separate prescaler and compare mode  One 16-bit Timer/Counter with separate prescaler, compare mode, and capture mode  Real time counter with separate oscillator   Six PWM channels  8-channel 10-bit ADC in TQFP and QFN/MLF package  Temperature measurement   Programmable serial USART  Master/slave SPI serial interface  Byte-oriented 2-wire serial interface (Phillips I2 C compatible)  Programmable watchdog timer with separate on-chip oscillator  On-chip analog comparator  Interrupt and wake-up on pin change  Special microcontroller features  Power-on reset and programmable brown-out detection  Internal calibrated oscillator  External and internal interrupt sources  Six sleep modes: Idle, ADC noise reduction, power-save, power-down, standby, and extended standby

Additional Information:

• Production Capacity: 10000
• Delivery Time: Within 1 Week

The high-performance, low-power Microchip 8-bit AVR® RISC-based microcontroller combines 256 KB ISP flash memory, 8 KB SRAM, 4 KB EEPROM, 86 general purpose I/O lines, 32 general purpose working registers, real-time counter, six flexible timer/counters with compare modes, PWM, four USARTs, byte-oriented Two-Wire serial interface, 16-channel 10-bit A/D converter, and a JTAG interface for on-chip debugging. The device achieves a throughput of 16 MIPS at 16 MHz and operates between 4.5-5.5 volts.

By executing powerful instructions in a single clock cycle, the device achieves a throughput approaching one MIPS per MHz, balancing power consumption and processing speed.

Additional Information:

• Delivery Time: Within 1 week

Features • High-performance, Low-power Atmel®AVR®8-bit Microcontroller • Advanced RISC Architecture – 133 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers + Peripheral Control Registers – Fully Static Operation – Up to 16MIPS Throughput at 16MHz – On-chip 2-cycle Multiplier • High Endurance Non-volatile Memory segments – 128Kbytes of In-System Self-programmable Flash program memory – 4Kbytes EEPROM – 4Kbytes Internal SRAM – Write/Erase cycles: 10,000 Flash/100,000 EEPROM – Data retention: 20 years at 85°C/100 years at 25°C(1) – Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot Program True Read-While-Write Operation – Up to 64Kbytes Optional External Memory Space – Programming Lock for Software Security – SPI Interface for In-System Programming • QTouch® library support – Capacitive touch buttons, sliders and wheels – QTouch and QMatrix acquisition – Up to 64 sense channels • JTAG (IEEE std. 1149.1 Compliant) Interface – Boundary-scan Capabilities According to the JTAG Standard – Extensive On-chip Debug Support – Programming of Flash, EEPROM, Fuses and Lock Bits through the JTAG Interface • Peripheral Features – Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes – Two Expanded 16-bit Timer/Counters with Separate Prescaler, Compare Mode and Capture Mode – Real Time Counter with Separate Oscillator – Two 8-bit PWM Channels – 6 PWM Channels with Programmable Resolution from 2 to 16 Bits – Output Compare Modulator – 8-channel, 10-bit ADC 8 Single-ended Channels 7 Differential Channels 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x – Byte-oriented Two-wire Serial Interface – Dual Programmable Serial USARTs – Master/Slave SPI Serial Interface – Programmable Watchdog Timer with On-chip Oscillator – On-chip Analog Comparator • Special Microcontroller Features – Power-on Reset and Programmable Brown-out Detection – Internal Calibrated RC Oscillator – External and Internal Interrupt Sources – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby – Software Selectable Clock Frequency – ATmega103 Compatibility Mode Selected by a Fuse – Global Pull-up Disable • I/O and Packages – 53 Programmable I/O Lines – 64-lead TQFP and 64-pad QFN/MLF • Operating Voltages – 2.7 - 5.5V ATmega128L – 4.5 - 5.5V ATmega128 • Speed Grades – 0 - 8MHz ATmega128L – 0 - 16MHz ATmega128

PIC24F 16-bit Microcontroller featuring nanoWatt XLP for eXtreme Low Power consumption. The device includes advanced low power features including a Low Voltage Sleep mode that maintains the device state and RAM with a typical current of 340 nA, and a Vbat pin that automatically transitions to the RTCC to a battery supply when Vdd is removed. The family is also includes a 480 segment LCD Driver with 60 segment x 8 common drive capability. The combination of feature make the part ideally suited to a number of battery powered and general purpose applications.

Additional Information:

• Item Code: PIC24
• Production Capacity: 100000
• Delivery Time: 2-3 weeks lead time
• Packaging Details: SMD

FeaturesCore• Max fCPU: 16 MHz• Advanced STM8 core with Harvardarchitecture and 3-stage pipeline• Extended instruction setMemories• Medium-density Flash/EEPROM– Program memory: 32 Kbytes of Flashmemory; data retention 20 years at 55 °Cafter 100 cycles– Data memory: 128 bytes true dataEEPROM; endurance up to 100 kwrite/erase cycles• RAM: 2 KbytesClock, reset and supply management• 2.95 V to 5.5 operating voltage• Flexible clock control, 4 master clock sources– Low-power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low-power 128 kHz RC• Clock security system with clock monitor• Power management– Low-power modes (wait, active-halt, halt)– Switch-off peripheral clocks individually– Permanently active, low-consumptionpower-on and power-down resetInterrupt management• Nested interrupt controller with 32 interrupts• Up to 37 external interrupts on 6 vectors

Additional Information:

• Production Capacity: 150000
• Delivery Time: 10-14 working days
• Packaging Details: SMD

Additional Information:

• Production Capacity: 100000
• Delivery Time: 10-14 working days
• Packaging Details: SMD (0.173", 4.40mm Width)

Additional Information:

• Production Capacity: 100000
• Delivery Time: 10-14 working days
• Packaging Details: SMD 32 LQFP

Additional Information:

• Item Code: STM32F103
• Production Capacity: 100000
• Delivery Time: 10-14 working days

Features• Core: Arm® 32-bit Cortex®-M0+ CPU,frequency up to 64 MHz• -40°C to 85°C/105°C/125°C operatingtemperature• Memories– Up to 512 Kbytes of Flash memory withprotection and securable area, two banks,read-while-write support– 144 Kbytes of SRAM (128 Kbytes with HWparity check)• CRC calculation unit• Reset and power management– Voltage range: 1.7 V to 3.6 V– Separate I/O supply pin (1.6 V to 3.6 V)– Power-on/Power-down reset (POR/PDR)– Programmable Brownout reset (BOR)– Programmable voltage detector (PVD)– Low-power modes:Sleep, Stop, Standby, Shutdown– VBAT supply for RTC and backup registers

Additional Information:

• Item Code: STM32G0
• Production Capacity: 100000
• Delivery Time: 1-2 Weeks
• Packaging Details: SMD

STM32U585xx
Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU,240 DMIPS, up to 2 MB Flash memory, 786 KB SRAM, SMPS


Features

Ultra-low-power with FlexPowerControl • 1.71 V to 3.6 V power supply • –40 °C to +85/125 °C temperature range • Low-power background autonomous mode (LPBAM): autonomous peripherals with DMA, functional down to Stop 2 mode • VBAT mode: supply for RTC, 32 x 32-bit backup registers and 2-Kbyte backup SRAM • 160 nA Shutdown mode (24 wakeup pins) • 210 nA Standby mode (24 wakeup pins) • 440 nA Standby mode with RTC • 1.9 μA Stop 3 mode with 16-Kbyte SRAM • 4.3 µA Stop 3 mode with full SRAM • 4.0 µA Stop 2 mode with 16-Kbyte SRAM • 8.95 µA Stop 2 mode with full SRAM • 19.5 μA/MHz Run mode @ 3.3 V Core • Arm® 32-bit Cortex®-M33 CPU with TrustZone®, MPU, DSP, and FPU

Additional Information:

• Item Code: STM32U585
• Production Capacity: 100000
• Delivery Time: 10-14 Workng days
• Packaging Details: SMD packaging type

Manufacturer: STMicroelectronics Product Category: 8-bit Microcontrollers - MCU RoHS: Details Series: STM8S007C8 Mounting Style: SMD/SMT Package/Case: LQFP-48 Core: STM8 Program Memory Size: 64 kB Data Bus Width: 8 bit ADC Resolution: 10 bit Maximum Clock Frequency: 24 MHz Number of I/Os: 38 I/O Data RAM Size: 6 kB Supply Voltage - Min: 2.95 V Supply Voltage - Max: 5.5 V Minimum Operating Temperature: - 40 C Maximum Operating Temperature: + 85 C Packaging: Tray Brand: STMicroelectronics Data RAM Type: RAM Data ROM Size: 128 B Data ROM Type: EEPROM Interface Type: I2C, SPI, UART Moisture Sensitive: Yes Number of ADC Channels: 10 Channel Number of Timers/Counters: 9 Timer Processor Series: STM8S007xx Product Type: 8-bit Microcontrollers - MCU Program Memory Type: Flash 1500 Subcategory: Microcontrollers - MCU Unit Weight: 181.700 mg

Additional Information:

• Production Capacity: 100000
• Delivery Time: 1-2 Weeks

STM8S103F2/STM8S103F3


Features Core• 16 MHz advanced STM8 core with Harvardarchitecture and 3-stage pipeline• Extended instruction setMemories• Program memory: 8 Kbyte Flash; dataretention 20 years at 55 °C after 10 kcycle• Data memory: 640 byte true data EEPROM;endurance 300 kcycle• RAM: 1 KbyteClock, reset and supply management• 2.95 to 5.5 V operating voltage• Flexible clock control, 4 master clock sources– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low-power 128 kHz RC• Clock security system with clock monitor• Power management:– Low-power modes (wait, active-halt, halt)– Switch-off peripheral clocks individually• Permanently active, low-consumption poweronand power-down resetInterrupt management• Nested interrupt controller with 32 interrupts• Up to 27 external interrupts on 6 vectorsTimers• Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, dead-timeinsertion and flexible synchronization• 16-bit general purpose timer, with 3 CAPCOMchannels (IC, OC or PWM)• 8-bit basic timer with 8-bit prescaler• Auto wake-up timer• Window watchdog and independent watchdogtimersCommunication interfaces• UART with clock output for synchronousoperation, SmartCard, IrDA, LIN master mode• SPI interface up to 8 Mbit/s• I2C interface up to 400 kbit/sAnalog to digital converter (ADC)• 10-bit, ±1 LSB ADC with up to 5 multiplexedchannels, scan mode and analog watchdogI/Os• Up to 28 I/Os on a 32-pin package including21 high sink outputs• Highly robust I/O design, immune againstcurrent injectionUnique ID• 96-bit unique key for each device

Additional Information:

• Production Capacity: 10000
• Delivery Time: 1-2 weeks

Features Core– Max fCPU: up to 24 MHz, 0 wait states @fCPU 16 MHz– Advanced STM8 core with Harvardarchitecture and 3-stage pipeline– Extended instruction set– Max 20 MIPS @ 24 MHz Memories– Program: up to 128 Kbytes Flash; dataretention 20 years at 55 °C after 10 kcycles– Data: up to 2 Kbytes true data EEPROM;endurance 300 kcycles– RAM: up to 6 Kbytes Clock, reset and supply management– 2.95 to 5.5 V operating voltage– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low power 128 kHz RC– Clock security system with clock monitor– Wait, active-halt, & halt low power modes– Peripheral clocks switched off individually– Permanently active, low consumptionpower-on and power-down reset Interrupt management– Nested interrupt controller with 32interrupts– Up to 37 external interrupts on 6 vectors Timers– 2x 16-bit general purpose timers, with 2+3CAPCOM channels (IC, OC or PWM)– Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, deadtime insertion and flexible synchronization– 8-bit basic timer with 8-bit prescaler– Auto wakeup timer– Window watchdog, independent watchdog Communications interfaces– High speed 1 Mbit/s active beCAN 2.0B– UART with clock output for synchronousoperation - LIN master mode– UART with LIN 2.1 compliant, master/slavemodes and automatic resynchronization– SPI interface up to 10 Mbit/s– I2C interface up to 400 Kbit/s 10-bit ADC with up to 16 channels I/Os– Up to 68 I/Os on an 80-pin packageincluding 18 high sink outputs– Highly robust I/O design, immune againstcurrent injection– Development support– Single wire interface module (SWIM) anddebug module (DM) 96-bit unique ID key for each device

Additional Information:

• Production Capacity: 25000
• Delivery Time: 1-2 WEEKS

Features Core– Max fCPU: up to 24 MHz, 0 wait states @fCPU 16 MHz– Advanced STM8 core with Harvardarchitecture and 3-stage pipeline– Extended instruction set– Max 20 MIPS @ 24 MHz Memories– Program: up to 128 Kbytes Flash; dataretention 20 years at 55 °C after 10 kcycles– Data: up to 2 Kbytes true data EEPROM;endurance 300 kcycles– RAM: up to 6 Kbytes Clock, reset and supply management– 2.95 to 5.5 V operating voltage– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low power 128 kHz RC– Clock security system with clock monitor– Wait, active-halt, & halt low power modes– Peripheral clocks switched off individually– Permanently active, low consumptionpower-on and power-down reset Interrupt management– Nested interrupt controller with 32interrupts– Up to 37 external interrupts on 6 vectors Timers– 2x 16-bit general purpose timers, with 2+3CAPCOM channels (IC, OC or PWM)– Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, deadtime insertion and flexible synchronization– 8-bit basic timer with 8-bit prescaler– Auto wakeup timer– Window watchdog, independent watchdog Communications interfaces– High speed 1 Mbit/s active beCAN 2.0B– UART with clock output for synchronousoperation - LIN master mode– UART with LIN 2.1 compliant, master/slavemodes and automatic resynchronization– SPI interface up to 10 Mbit/s– I2C interface up to 400 Kbit/s 10-bit ADC with up to 16 channels I/Os– Up to 68 I/Os on an 80-pin packageincluding 18 high sink outputs– Highly robust I/O design, immune againstcurrent injection– Development support– Single wire interface module (SWIM) anddebug module (DM) 96-bit unique ID key for each device

Additional Information:

• Production Capacity: 25000
• Delivery Time: 1-2 WEEKS

1. Features Core– Max fCPU: up to 24 MHz, 0 wait states @fCPU 16 MHz– Advanced STM8 core with Harvardarchitecture and 3-stage pipeline– Extended instruction set– Max 20 MIPS @ 24 MHz Memories– Program: up to 128 Kbytes Flash; dataretention 20 years at 55 °C after 10 kcycles– Data: up to 2 Kbytes true data EEPROM;endurance 300 kcycles– RAM: up to 6 Kbytes Clock, reset and supply management– 2.95 to 5.5 V operating voltage– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low power 128 kHz RC– Clock security system with clock monitor– Wait, active-halt, & halt low power modes– Peripheral clocks switched off individually– Permanently active, low consumptionpower-on and power-down reset Interrupt management– Nested interrupt controller with 32interrupts– Up to 37 external interrupts on 6 vectors Timers– 2x 16-bit general purpose timers, with 2+3CAPCOM channels (IC, OC or PWM)– Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, deadtime insertion and flexible synchronization– 8-bit basic timer with 8-bit prescaler– Auto wakeup timer– Window watchdog, independent watchdog Communications interfaces– High speed 1 Mbit/s active beCAN 2.0B– UART with clock output for synchronousoperation - LIN master mode– UART with LIN 2.1 compliant, master/slavemodes and automatic resynchronization– SPI interface up to 10 Mbit/s– I2C interface up to 400 Kbit/s 10-bit ADC with up to 16 channels I/Os– Up to 68 I/Os on an 80-pin packageincluding 18 high sink outputs– Highly robust I/O design, immune againstcurrent injection– Development support– Single wire interface module (SWIM) anddebug module (DM) 96-bit unique ID key for each device

Additional Information:

• Production Capacity: 25000
• Delivery Time: 10-14 Working Days

Features Core– Max fCPU: up to 24 MHz, 0 wait states @fCPU 16 MHz– Advanced STM8 core with Harvardarchitecture and 3-stage pipeline– Extended instruction set– Max 20 MIPS @ 24 MHz Memories– Program: up to 128 Kbytes Flash; dataretention 20 years at 55 °C after 10 kcycles– Data: up to 2 Kbytes true data EEPROM;endurance 300 kcycles– RAM: up to 6 Kbytes Clock, reset and supply management– 2.95 to 5.5 V operating voltage– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low power 128 kHz RC– Clock security system with clock monitor– Wait, active-halt, & halt low power modes– Peripheral clocks switched off individually– Permanently active, low consumptionpower-on and power-down reset Interrupt management– Nested interrupt controller with 32interrupts– Up to 37 external interrupts on 6 vectors Timers– 2x 16-bit general purpose timers, with 2+3CAPCOM channels (IC, OC or PWM)– Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, deadtime insertion and flexible synchronization– 8-bit basic timer with 8-bit prescaler– Auto wakeup timer– Window watchdog, independent watchdog Communications interfaces– High speed 1 Mbit/s active beCAN 2.0B– UART with clock output for synchronousoperation - LIN master mode– UART with LIN 2.1 compliant, master/slavemodes and automatic resynchronization– SPI interface up to 10 Mbit/s– I2C interface up to 400 Kbit/s 10-bit ADC with up to 16 channels I/Os– Up to 68 I/Os on an 80-pin packageincluding 18 high sink outputs– Highly robust I/O design, immune againstcurrent injection– Development support– Single wire interface module (SWIM) anddebug module (DM) 96-bit unique ID key for each device

Additional Information:

• Delivery Time: 1-2 Weeks

Features Core– Max fCPU: up to 24 MHz, 0 wait states @fCPU 16 MHz– Advanced STM8 core with Harvardarchitecture and 3-stage pipeline– Extended instruction set– Max 20 MIPS @ 24 MHz Memories– Program: up to 128 Kbytes Flash; dataretention 20 years at 55 °C after 10 kcycles– Data: up to 2 Kbytes true data EEPROM;endurance 300 kcycles– RAM: up to 6 Kbytes Clock, reset and supply management– 2.95 to 5.5 V operating voltage– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low power 128 kHz RC– Clock security system with clock monitor– Wait, active-halt, & halt low power modes– Peripheral clocks switched off individually– Permanently active, low consumptionpower-on and power-down reset Interrupt management– Nested interrupt controller with 32interrupts– Up to 37 external interrupts on 6 vectors Timers– 2x 16-bit general purpose timers, with 2+3CAPCOM channels (IC, OC or PWM)– Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, deadtime insertion and flexible synchronization– 8-bit basic timer with 8-bit prescaler– Auto wakeup timer– Window watchdog, independent watchdog Communications interfaces– High speed 1 Mbit/s active beCAN 2.0B– UART with clock output for synchronousoperation - LIN master mode– UART with LIN 2.1 compliant, master/slavemodes and automatic resynchronization– SPI interface up to 10 Mbit/s– I2C interface up to 400 Kbit/s 10-bit ADC with up to 16 channels I/Os– Up to 68 I/Os on an 80-pin packageincluding 18 high sink outputs– Highly robust I/O design, immune againstcurrent injection– Development support– Single wire interface module (SWIM) anddebug module (DM) 96-bit unique ID key for each device

Additional Information:

• Delivery Time: 1-2 Weeks

Features Core– Max fCPU: up to 24 MHz, 0 wait states @fCPU 16 MHz– Advanced STM8 core with Harvardarchitecture and 3-stage pipeline– Extended instruction set– Max 20 MIPS @ 24 MHz Memories– Program: up to 128 Kbytes Flash; dataretention 20 years at 55 °C after 10 kcycles– Data: up to 2 Kbytes true data EEPROM;endurance 300 kcycles– RAM: up to 6 Kbytes Clock, reset and supply management– 2.95 to 5.5 V operating voltage– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low power 128 kHz RC– Clock security system with clock monitor– Wait, active-halt, & halt low power modes– Peripheral clocks switched off individually– Permanently active, low consumptionpower-on and power-down reset Interrupt management– Nested interrupt controller with 32interrupts– Up to 37 external interrupts on 6 vectors Timers– 2x 16-bit general purpose timers, with 2+3CAPCOM channels (IC, OC or PWM)– Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, deadtime insertion and flexible synchronization– 8-bit basic timer with 8-bit prescaler– Auto wakeup timer– Window watchdog, independent watchdog Communications interfaces– High speed 1 Mbit/s active beCAN 2.0B– UART with clock output for synchronousoperation - LIN master mode– UART with LIN 2.1 compliant, master/slavemodes and automatic resynchronization– SPI interface up to 10 Mbit/s– I2C interface up to 400 Kbit/s 10-bit ADC with up to 16 channels I/Os– Up to 68 I/Os on an 80-pin packageincluding 18 high sink outputs– Highly robust I/O design, immune againstcurrent injection– Development support– Single wire interface module (SWIM) anddebug module (DM) 96-bit unique ID key for each device

Additional Information:

• Delivery Time: 1-2 Weeks

Features Core– Max fCPU: up to 24 MHz, 0 wait states @fCPU 16 MHz– Advanced STM8 core with Harvardarchitecture and 3-stage pipeline– Extended instruction set– Max 20 MIPS @ 24 MHz Memories– Program: up to 128 Kbytes Flash; dataretention 20 years at 55 °C after 10 kcycles– Data: up to 2 Kbytes true data EEPROM;endurance 300 kcycles– RAM: up to 6 Kbytes Clock, reset and supply management– 2.95 to 5.5 V operating voltage– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low power 128 kHz RC– Clock security system with clock monitor– Wait, active-halt, & halt low power modes– Peripheral clocks switched off individually– Permanently active, low consumptionpower-on and power-down reset Interrupt management– Nested interrupt controller with 32interrupts– Up to 37 external interrupts on 6 vectors Timers– 2x 16-bit general purpose timers, with 2+3CAPCOM channels (IC, OC or PWM)– Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, deadtime insertion and flexible synchronization– 8-bit basic timer with 8-bit prescaler– Auto wakeup timer– Window watchdog, independent watchdog Communications interfaces– High speed 1 Mbit/s active beCAN 2.0B– UART with clock output for synchronousoperation - LIN master mode– UART with LIN 2.1 compliant, master/slavemodes and automatic resynchronization– SPI interface up to 10 Mbit/s– I2C interface up to 400 Kbit/s 10-bit ADC with up to 16 channels I/Os– Up to 68 I/Os on an 80-pin packageincluding 18 high sink outputs– Highly robust I/O design, immune againstcurrent injection– Development support– Single wire interface module (SWIM) anddebug module (DM) 96-bit unique ID key for each device

Additional Information:

• Delivery Time: 1-2 Weeks

Features Core– Max fCPU: up to 24 MHz, 0 wait states @fCPU 16 MHz– Advanced STM8 core with Harvardarchitecture and 3-stage pipeline– Extended instruction set– Max 20 MIPS @ 24 MHz Memories– Program: up to 128 Kbytes Flash; dataretention 20 years at 55 °C after 10 kcycles– Data: up to 2 Kbytes true data EEPROM;endurance 300 kcycles– RAM: up to 6 Kbytes Clock, reset and supply management– 2.95 to 5.5 V operating voltage– Low power crystal resonator oscillator– External clock input– Internal, user-trimmable 16 MHz RC– Internal low power 128 kHz RC– Clock security system with clock monitor– Wait, active-halt, & halt low power modes– Peripheral clocks switched off individually– Permanently active, low consumptionpower-on and power-down reset Interrupt management– Nested interrupt controller with 32interrupts– Up to 37 external interrupts on 6 vectors Timers– 2x 16-bit general purpose timers, with 2+3CAPCOM channels (IC, OC or PWM)– Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, deadtime insertion and flexible synchronization– 8-bit basic timer with 8-bit prescaler– Auto wakeup timer– Window watchdog, independent watchdog Communications interfaces– High speed 1 Mbit/s active beCAN 2.0B– UART with clock output for synchronousoperation - LIN master mode– UART with LIN 2.1 compliant, master/slavemodes and automatic resynchronization– SPI interface up to 10 Mbit/s– I2C interface up to 400 Kbit/s 10-bit ADC with up to 16 channels I/Os– Up to 68 I/Os on an 80-pin packageincluding 18 high sink outputs– Highly robust I/O design, immune againstcurrent injection– Development support– Single wire interface module (SWIM) anddebug module (DM) 96-bit unique ID key for each device

Additional Information:

• Delivery Time: As per the availibility stock 7-10 working days

32-bit Microcontrollers (up to 512 KB Flash and 128 KB SRAM) with Graphics Interface, USB, CAN, and Ethernet 
Operating Conditions• 2.3V to 3.6V, -40ºC to +105ºC, DC to 80 MHzCore: 80 MHz/105 DMIPS MIPS32® M4K®• MIPS16e® mode for up to 40% smaller code size• Code-efficient (C and Assembly) architecture• Single-cycle (MAC) 32x16 and two-cycle 32x32 multiplyClock Management• 0.9% internal oscillator (on some variants)• Programmable PLLs and oscillator clock sources• Fail-Safe Clock Monitor (FSCM)• Independent Watchdog Timer• Fast wake-up and start-upPower Management• Low-power management modes (Sleep and Idle)• Integrated Power-on Reset, Brown-out Reset• 0.5 mA/MHz dynamic current (typical)• 41 µA IPD current (typical)Graphics Features• External graphics interface with up to 34 Parallel MasterPort (PMP) pins:- Interface to external graphics controller- Capable of driving LCD directly with DMA andinternal or external memoryAnalog Features• ADC Module:- 10-bit 1 Msps rate with one Sample and Hold (S&H)- 16 analog inputs- Can operate during Sleep mode• Flexible and independent ADC trigger sources• Comparators:- Two dual-input Comparator modules- Programmable references with 32 voltage pointsTimers/Output Compare/Input Capture• Five General Purpose Timers:- Five 16-bit and up to two 32-bit Timers/Counters• Five Output Compare (OC) modules• Five Input Capture (IC) modules• Real-Time Clock and Calendar (RTCC) moduleCommunication Interfaces• USB 2.0-compliant Full-Speed OTG controller• 10/100 Mbps Ethernet MAC with MII and RMII interface• CAN module:- 2.0B Active with DeviceNet™ addressing support• Six UART modules (20 Mbps):- Supports LIN 2.1 protocols and IrDA® support• Up to four 4-wire SPI modules (25 Mbps)• Up to five I2C modules (up to 1 Mbaud) with SMBussupport• Parallel Master Port (PMP)Direct Memory Access (DMA)• Up to eight channels of hardware DMA with automaticdata size detection• 32-bit Programmable Cyclic Redundancy Check (CRC)• Six additional channels dedicated to USB, Ethernet andCAN modulesInput/Output• 15 mA or 10 mA source/sink for standard VOH/VOL andup to 22 mA for non-standard VOH1• 5V-tolerant pins• Selectable open drain and pull-ups• External interruptsClass B Support• Class B Safety Library, IEC 60730Debugger Development Support• In-circuit and in-application programming• 4-wire MIPS® Enhanced JTAG interface• Unlimited program and six complex data breakpoints• IEEE 1149.2-compatible (JTAG) boundary scan

Additional Information:

• Production Capacity: 10000
• Delivery Time: 1-2 Weeks Lead time
• Packaging Details: SMD

Features• Core: Arm® 32-bit Cortex®-M0 CPU, frequencyup to 48 MHz• Memories– 16 to 256 Kbytes of Flash memory– 4 to 32 Kbytes of SRAM with HW parity• CRC calculation unit• Reset and power management– Digital & I/Os supply: VDD = 2.4 V to 3.6 V– Analog supply: VDDA = VDD to 3.6 V– Power-on/Power down reset (POR/PDR)– Low power modes: Sleep, Stop, Standby• Clock management– 4 to 32 MHz crystal oscillator– 32 kHz oscillator for RTC with calibration– Internal 8 MHz RC with x6 PLL option– Internal 40 kHz RC oscillator• Up to 55 fast I/Os– All mappable on external interrupt vectors– Up to 55 I/Os with 5V tolerant capability• 5-channel DMA controller• One 12-bit, 1.0 µs ADC (up to 16 channels)– Conversion range: 0 to 3.6 V– Separate analog supply: 2.4 V to 3.6 V• Calendar RTC with alarm and periodic wakeupfrom Stop/Standby• 11 timers– One 16-bit advanced-control timer forsix-channel PWM output– Up to seven 16-bit timers, with up to fourIC/OC, OCN, usable for IR controldecoding– Independent and system watchdog timers– SysTick timer

Additional Information:

• Production Capacity: 10000000
• Delivery Time: 1-2 weeks
• Packaging Details: TSSOP20 6.4 × 4.4 mm LQFP64 10 × 10 mm LQFP48 7 × 7 mm LQFP32 7 × 7 mm

The STM32F0x0 microcontrollers feature an Arm® Cortex®-M0 core and run at speeds up to 48 MHz. While achieving the STM32’s lowest ever price point, the STM32F0x0 line comes with a full set of performing peripherals, such as fast 12-bit ADC, advanced and flexible timers, calendar RTC and communication peripherals such as the I²C, USART and SPI and USB.
This combination easily outperforms existing 8-bit architectures and allows all application designers to benefit from the simplicity and efficiency of a state-of-the-art 32-bit core.The STM32F0x0 Value line covers many memory and pin count combinations with only few competitive devices and thus further enhances the overall cost efficiency of your projects.
Application designers starting with the STM32F030 benefit from being able to upgrade to any of the devices in the powerful STM32 portfolio at any time with an extraordinary degree of reusability of tools and application software.

Additional Information:

• Production Capacity: 100000
• Delivery Time: 10-14 working days